Loose Tube Design

Smartcore Indoor Cables -

Loose Tube Design


 
Indoor cables are flexible, non-gel filled cable for use in telecommunication stations for interconnection between the optical line system and the fiber distribution frame. It is also suitable for data networks. The sheath is made of PVC that has good tensile strength and tear resistance. The cable can be terminated with a wide variety of connectors. Simplex design is supplied with one tight buffered fiber (in single-mode and/or multi-mode) whereas Duplex Design is supplied with two tight buffered fibers, single-mode or multi-mode.
Loose tube containing fibres filled with jelly surrounded by strength member aramid yarn & overall jacketed with LSZH.
  • Aramid Yarn reinforcement for ruggedized protection.
  • Flame retardant.
  • Easy to strip & terminate.
  • Meets IEC 60794, EIA/TIA, ITU-T, EN 187000, RUS 1755.900 & International standards.
Options Available
  • Tight Buffered coating material: Nylon/PVC/LSZH.
  • Customized designs are available on request.
  • Fibre options: SM (G652B/D, G655 & G657), MM (OM1, OM2 & OM3)
  • Loose tube design also available with Glass Yarns.
Part Number Fibre Count Diameter (mm) Nominal Weight (kg/Km) Nominal Tensile Strength
(N)
Crush Resistance
(N/10cm)
Bending Radius
(mm)
  Height   Installation (Short Term) Operating
(Long Term)
  Temporary (10 x D of Cable) Dynamic Permanant (20 x D of Cable) Static
P-12/SM/UT (A)-MFZ-Y5.8 UP TO 12 5.8 33 1000 500 500 58 116
P-24/SM/UT (A)-MFZ-Y 7.0 14 TO 24 7.0 50 1000 500 500 70 140

© Copyright 2016 by Aksh Optifibre | Terms of Use | Privacy Statement

We smarten up your life.. TM